diff --git a/matlab/TCV/loadTCVdata.m b/matlab/TCV/loadTCVdata.m
deleted file mode 100644
index 49f83dcfe2d9e56ae0987a296c312b64e0808a23..0000000000000000000000000000000000000000
--- a/matlab/TCV/loadTCVdata.m
+++ /dev/null
@@ -1,1424 +0,0 @@
- function [trace,error_status,varargout]=loadTCVdata(shot,data_type,varargin)
-%
-% Added option to load shot=-1 or >=100000
-% Added option shot=-9 to list keywords
-%
-% list of data_type currently available (when [_2,_3] is added, means can add _i to get Liuqe i):
-% if -1 is added, can also get it from FBTE with shot=-1, >=100000 or liuqe_version='_-1' (to get model file)
-%
-% 'Ip'[_2,_3] = current
-% 'B0'[_2,_3] = current
-% 'zmag'[_2,_3] = vertical position of the center of the plasma (magnetic axis)
-% 'rmag'[_2,_3] = radial position of the center of the plasma
-% 'rcont'[_2,_3] = R of plama boundary vs time
-% 'zcont'[_2,_3] = Z of plama boundary vs time
-% 'vol'[_2,_3] = volume of flux surfaces
-% 'rhovol'[_2,_3] = sqrt(V(:,t)/V(edge,t)), normalised rho variable based on volume of flux surfaces
-% 'qrho'[_2,_3] = q profile on rho mesh
-% 'q95'[_2,_3] = q95 vs time
-% 'kappa', 'elon'[_2,_3] = edge elongation vs time
-% 'delta', 'triang'[_2,_3] = edge averaged triangularity vs time
-% 'deltatop', 'triangtop'[_2,_3] = edge upper (top) triangularity vs time
-% 'deltabot', 'triangbot'[_2,_3] = edge lower (bottom) triangularity vs time
-% 'j_tor'[_2,_3] = J_TOR vs (R,Z,time)
-% 'neint' = line-integrated electron density [m/m^3]
-% 'nel' = line-averaged electron density [1/m^3]
-% 'ne'= ne raw profile on (z,t). ADD error bars in .std
-% 'te'= Te raw profile on (z,t). ADD error bars in .std
-% 'nerho'[_2,_3]= ne profile on (rho=sqrt(psi),time) mesh.Note rho is a 2D array as depends on time. ADD error bars in .std
-% 'terho'[_2,_3]= Te profile on (rho=sqrt(psi),time) mesh.Note rho is a 2D array as depends on time. ADD error bars in .std
-% 'nerhozshift'[_2,_3]= same as nerho but allows for zshift [m] in equil given by varargin{1}
-% 'terhozshift'[_2,_3]= same as terho but allows for zshift [m] in equil given by varargin{1}
-% 'profnerho' = ne smoothed or fitted , vs (rho,t) (from Thomson auto fit)
-% 'profterho' = te smoothed or fitted , vs (rho,t) (from Thomson auto fit)
-% 'neft' = ne fitted from data on rho mesh (from proffit.local_time:neft_abs)
-% 'neft:4' = ne fitted from data on rho mesh (from proffit.local_time:neft_abs from trial:trial_indx=4)
-% 'teft' = te fitted from data on rho mesh (from proffit.local_time:teft)
-% 'neftav' = ne fitted from averaged over time data on rho mesh (from proffit.avg_time:neft_abs)
-% 'teftav' = te fitted from averaged over time data on rho mesh (from proffit.avg_time:teft)
-% 'vtor'= Toroidal rotation of C raw profile on (rho,t). ADD error bars in .std, as well as time and rho error bars
-% 'vtorfit'= Toroidal rotation of C fitted profile on (rho,t)
-% 'vpol'= Poloidal rotation of C raw profile on (rho,t). ADD error bars in .std, as well as time and rho error bars
-% 'vpolfit'= Poloidal rotation of C fitted profile on (rho,t)
-% 'Ti' (or Tc), 'Tifit', 'ni' (or nC), 'nifit', 'zeffcxrs', 'zeffcxrsfit': similar to 'vtor' from CXRS
-% 'ece' = electron cyclotron emission
-% 'sxr' = soft x-ray emission
-% 'sxR' = soft x-ray emission with varargout{1} option (requires varargin{4}!)
-% 'MPX' = soft x-ray from wire chambers
-% 'IOH' = current in ohmic transformer coils IOH_1
-% 'vloop' = loop voltage
-% 'pgyro' = ECH power for each gyro(1:9) and total (10)
-%
-% 'xx_2 or xx_3' for Liuqe2 or 3: same as above for xx related to equilibrium
-% 'xx_-1 or xx_-1' for FBTE values (model or shot=-1 or shot>=100000): same as above for xx related to equilibrium
-%
-% INPUT:
-% shot: shot number
-% data_type: type of the required data
-%
-% Definition of varargin depends on data_type:
-%
-% data_type=sxr or ece:
-% varargin{1}: [i1 i2] : if not empty, assumes need many chords from i1 to i2
-% varargin{2}: channel status 1= unread yet, 0= read
-% (for traces with many channel, enables to load additional channels,
-% like SXR, ECE, etc.)
-% varargin{3}: zmag for varargout{1} computation
-% (can have more inputs for AUG, but not used here)
-% data_type=nerhozshift or terhozshift:
-% varargin{1}: zshift [m] constant or (t) : positive, moves equil up (that is thomson effective z down)
-% time dependent: needs same time base as psitbx:psi
-%
-% OUTPUT:
-%
-% trace.data: data
-% trace.t: time of reference
-% trace.x: space of reference
-% trace.dim: cell array of grids, trace.dim{1}, {2}, ...
-% trace.dimunits: units of dimensions
-% trace.units: units of data
-%
-% Additional Output arguments depending on data_type
-%
-% data_type=sxR, ece:
-% varargout{1}: major radius: intersection/projection of the view lines with z=zmag
-% data_type=MPX:
-% varargout{1}: te be determined
-%
-%
-% function needed: mds functions-xtomo_geometry-get_xtomo_data (Furno's routines)
-% VsxrTCVradius
-% Example:
-% [ip,error_status]=loadTCVdata(shot,'Ip',1);
-% [sxr,error_status,R]=loadTCVdata(shot,'sxR',1);
-%
-
-varargout{1}=cell(1,1);
-error_status=1;
-
-% To allow multiple ways of writing a specific keyword, use data_type_eff within this routine
-if exist('data_type') && ~isempty(data_type)
- data_type_eff=data_type;
-else
- data_type_eff=' ';
-end
-i_23=0;
-% LIUQE tree
-begstr = '\results::';
-endstr = '';
-liuqe_version = 1;
-if length(data_type_eff)>2
- if strcmp(data_type_eff(end-1:end),'_2') | strcmp(data_type_eff(end-1:end),'_3')
- i_23=2;
- endstr=data_type_eff(end-1:end);
- liuqe_version = str2num(data_type_eff(end:end));
- elseif strcmp(upper(data_type_eff(end-2:end)),'_-1')
- i_23=3;
- begstr = 'tcv_eq( "';
- endstr = '", "FBTE" )';
- liuqe_version = -1;
- end
-end
-if shot==-1 || (shot>=100000 && shot<200000)
- % requires FBTE
- liuqe_version = -1;
- begstr = 'tcv_eq( "';
- endstr = '", "FBTE" )';
-end
-
-% use keyword without eventual _2 or _3 extension to check for multiple possibilities
-% Also remove ":4" for trial_indx specification
-jj=strfind(data_type_eff,':');
-trialindx=[];
-if ~isempty(jj)
- ii=strmatch(data_type_eff(1:jj-1),[{'teft'},{'neft'},{'teftav'},{'neftav'}]);
- if ~isempty(ii)
- trialindx=str2num(data_type_eff(jj+1:end));
- data_type_eff_noext=[data_type_eff(1:jj-1) ':trial'];
- else
- data_type_eff_noext=data_type_eff(1:end-i_23);
- end
-else
- data_type_eff_noext=data_type_eff(1:end-i_23);
-end
-
-if ~isempty(strmatch(data_type_eff_noext,[{'ip'} {'i_p'} {'xip'}],'exact'))
- data_type_eff_noext='Ip';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'b0'} {'B_0'} {'Bgeom'} {'BGEOM'}],'exact'))
- data_type_eff_noext='B0';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Te'} {'t_e'} {'TE'} {'T_e'}],'exact'))
- data_type_eff_noext='te';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Te_edge'} {'TE_edge'}],'exact'))
- data_type_eff_noext='te_edge';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Ne_edge'} {'NE_edge'}],'exact'))
- data_type_eff_noext='ne';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Rcont'}],'exact'))
- data_type_eff_noext='rcont';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Zcont'}],'exact'))
- data_type_eff_noext='zcont';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Terho'}],'exact'))
- data_type_eff_noext='terho';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Terhozshift'}],'exact'))
- data_type_eff_noext='terhozshift';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'SXR'}],'exact'))
- data_type_eff_noext='sxr';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'ECE'}],'exact'))
- data_type_eff_noext='ece';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'VOL'} {'volume'}],'exact'))
- data_type_eff_noext='vol';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'RHOVOL'}],'exact'))
- data_type_eff_noext='rhovol';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'q_95'} {'Q95'}],'exact'))
- data_type_eff_noext='q95';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'elongation'} {'elon'}],'exact'))
- data_type_eff_noext='kappa';
-end
-if ~isempty(strmatch(lower(data_type_eff_noext),[{'j_tor'} {'jtor'} {'\results::j_tor'}],'exact'))
- data_type_eff_noext='jtor';
- data_type_eff = ['jtor' endstr];
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'triangularity'} {'triang'}],'exact'))
- data_type_eff_noext='delta';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'deltaup'} {'deltau'} {'triangtop'} {'triangu'} {'triangup'}],'exact'))
- data_type_eff_noext='deltatop';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'deltalow'} {'deltal'} {'triangbot'} {'triangl'} {'trianglow'}],'exact'))
- data_type_eff_noext='deltabot';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Rmag'}],'exact'))
- data_type_eff_noext='rmag';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Zmag'}],'exact'))
- data_type_eff_noext='zmag';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'MPX'}],'exact'))
- data_type_eff_noext='MPX';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'ioh'} {'Ioh'} {'iot'} {'IOT'}],'exact'))
- data_type_eff_noext='IOH';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Vloop'} {'Vsurf'} {'vsurf'}],'exact'))
- data_type_eff_noext='vloop';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'vtor'} {'v_tor'} {'vi'} {'vc'} {'v_i'} {'v_c'} {'VTOR'} {'V_TOR'} {'VI'} {'VC'} {'V_I'} {'V_C'}],'exact'))
- data_type_eff_noext='vi_tor';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'vtorfit'} {'vtorft'} {'v_torfit'} {'vifit'} {'vcfit'} {'v_ifit'} {'v_cfit'} {'VTORfit'} {'V_TORfit'} {'VIfit'} {'VCfit'} {'V_Ifit'} {'V_Cfit'}],'exact'))
- data_type_eff_noext='vi_torfit';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'vpol'} {'v_pol'} {'VPOL'} {'V_POL'}],'exact'))
- data_type_eff_noext='vi_pol';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'vpolfit'} {'vpolft'} {'v_polfit'} {'VPOLfit'} {'V_POLfit'}],'exact'))
- data_type_eff_noext='vi_polfit';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Ti'} {'ti'} {'TC'} {'tc'} {'T_C'} {'t_c'}],'exact'))
- data_type_eff_noext='Ti';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Tifit'} {'tifit'} {'TCfit'} {'tcfit'} {'T_Cfit'} {'t_cfit'}],'exact'))
- data_type_eff_noext='Tifit';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Ni'} {'ni'} {'NC'} {'nc'} {'N_C'} {'n_c'}],'exact'))
- data_type_eff_noext='ni';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Nifit'} {'nifit'} {'NCfit'} {'ncfit'} {'N_Cfit'} {'n_cfit'}],'exact'))
- data_type_eff_noext='nifit';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Zeffcxrs'} {'zeffcxrs'} {'Z_effcxrs'} {'z_effcxrs'} {'Zeff_cxrs'} {'zeff_cxrs'} {'Z_eff_cxrs'} {'z_eff_cxrs'}],'exact'))
- data_type_eff_noext='zeffcxrs';
-end
-if ~isempty(strmatch(data_type_eff_noext,[{'Zeffcxrsfit'} {'zeffcxrsfit'} {'Z_effcxrsfit'} {'z_effcxrsfit'} {'Zeff_cxrsfit'} {'zeff_cxrsfit'} {'Z_eff_cxrsfit'} {'z_eff_cxrsfit'}],'exact'))
- data_type_eff_noext='zeffcxrsfit';
-end
-
-% some defaults
-
-% nodes which have _2 and _3 equivalence, related to simpletdi case
-liuqe23=[{'\results::area'} {'\results::beta_pol'} {'\results::beta_tor'} ...
- {'\results::delta_95'} {'\results::delta_95_bot'} {'\results::delta_95_top'} ...
- {'\results::delta_edge'} {'\results::delta_ed_bot'} {'\results::delta_ed_top'} ...
- {'\results::diamag'} {'\results::i_p'} {'\results::j_tor'} ...
- {'\results::kappa_95'} {'\results::kappa_edge'} {'\results::kappa_zero'} ...
- {'\results::lambda'} {'\results::l_i'} {'\results::psi_axis'} {'\results::psi_values'} ...
- {'\results::q_95'} {'\results::q_edge'} {'\results::q_zero'} {'\results::rms_error'} ...
- {'\results::z_axis'} {'\results::r_axis'} {'\results::q_psi'} ...
- {'\results::total_energy'} {'\results::tor_flux'} {'\results::volume'} ...
- {'\results::r_contour'} {'\results::z_contour'} ...
- {'\results::thomson:psiscatvol'} {'\results::thomson:psi_max'}];
-
-% nodes which have FBTE equivalence, related to simpletdi case
-liuqeFBTE=[{'\results::i_p'} {'\results::z_axis'} {'\results::r_axis'} {'\results::q_psi'} ...
- {'\results::beta_tor'} {'\results::beta_pol'} {'\results::q_95'} {'\results::l_i'} {'\results::delta_95'} ...
- {'\results::kappa_95'} {'\results::r_contour'} {'\results::z_contour'} {'\results::psi_axis'}];
-
-% keywords which do not have FBTE equivalence and are returned empty
-noFBTE=[{'ne'} {'te'} {'nerho'} {'terho'} {'ne_edge'} {'te_edge'} {'nerho_edge'} {'terho_edge'} {'nerhozshift'} {'terhozshift'} {'profnerho'} {'profterho'} ...
- {'neft'} {'neft:trial'} {'teft:trial'} {'neftav:trial'} {'teftav:trial'} {'sxr'} {'sxR'} {'ece'} {'MPX'} {'IOH'} {'vloop'} {'neint'} {'nel'} ...
- {'vi_tor'} {'vi_torfit'} {'vi_pol'} {'vi_polfit'} {'Ti'} {'Tifit'} {'ni'} {'nifit'} {'zeffcxrs'} {'zeffcxrsfit'}];
-
-% all keywords and corresponding case to run below
-TCVkeywrdall=[{'Ip'} {'B0'} {'zmag'} {'rmag'} {'rcont'} {'zcont'} {'vol'} {'rhovol'} {'qrho'} {'q95'} {'kappa'} ...
- {'delta'} {'deltatop'} {'deltabot'} {'neint'} {'nel'} ...
- {'ne'} {'te'} {'nerho'} {'terho'} {'ne_edge'} {'te_edge'} {'nerho_edge'} {'terho_edge'} {'nerhozshift'} {'terhozshift'} {'profnerho'} {'profterho'} ...
- {'neft'} {'teft'} {'neftav'} {'teftav'} {'neft:trial'} {'teft:trial'} {'neftav:trial'} {'teftav:trial'} ...
- {'sxr'} {'sxR'} {'ece'} {'MPX'} {'IOH'} {'vloop'} {'pgyro'} {'jtor'} {'vi_tor'} {'vi_torfit'} {'vi_pol'} {'vi_polfit'} {'Ti'} {'Tifit'} {'ni'} {'nifit'} {'zeffcxrs'} {'zeffcxrsfit'}];
-
-TCVsig.iip=strmatch('Ip',TCVkeywrdall,'exact');
-TCVsig.iB0=strmatch('B0',TCVkeywrdall,'exact');
-TCVsig.izmag=strmatch('zmag',TCVkeywrdall,'exact');
-TCVsig.irmag=strmatch('rmag',TCVkeywrdall,'exact');
-TCVsig.ircont=strmatch('rcont',TCVkeywrdall,'exact');
-TCVsig.izcont=strmatch('zcont',TCVkeywrdall,'exact');
-TCVsig.ivol=strmatch('vol',TCVkeywrdall,'exact');
-TCVsig.irhovol=strmatch('rhovol',TCVkeywrdall,'exact');
-TCVsig.iqrho=strmatch('qrho',TCVkeywrdall,'exact');
-TCVsig.iq95=strmatch('q95',TCVkeywrdall,'exact');
-TCVsig.ikappa=strmatch('kappa',TCVkeywrdall,'exact');
-TCVsig.idelta=strmatch('delta',TCVkeywrdall,'exact');
-TCVsig.ideltatop=strmatch('deltatop',TCVkeywrdall,'exact');
-TCVsig.ideltabot=strmatch('deltabot',TCVkeywrdall,'exact');
-TCVsig.ineint=strmatch('neint',TCVkeywrdall,'exact');
-TCVsig.inel=strmatch('nel',TCVkeywrdall,'exact');
-TCVsig.ine=strmatch('ne',TCVkeywrdall,'exact');
-TCVsig.ite=strmatch('te',TCVkeywrdall,'exact');
-TCVsig.ine_edge=strmatch('ne_edge',TCVkeywrdall,'exact');
-TCVsig.ite_edge=strmatch('te_edge',TCVkeywrdall,'exact');
-TCVsig.inerho=strmatch('nerho',TCVkeywrdall,'exact');
-TCVsig.iterho=strmatch('terho',TCVkeywrdall,'exact');
-TCVsig.inerho_edge=strmatch('nerho_edge',TCVkeywrdall,'exact');
-TCVsig.iterho_edge=strmatch('terho_edge',TCVkeywrdall,'exact');
-TCVsig.inerhozshift=strmatch('nerhozshift',TCVkeywrdall,'exact');
-TCVsig.iterhozshift=strmatch('terhozshift',TCVkeywrdall,'exact');
-TCVsig.iprofnerho=strmatch('profnerho',TCVkeywrdall,'exact');
-TCVsig.iprofterho=strmatch('profterho',TCVkeywrdall,'exact');
-TCVsig.ineft=strmatch('neft',TCVkeywrdall,'exact');
-TCVsig.ineft_trial=strmatch('neft:trial',TCVkeywrdall);
-TCVsig.iteft=strmatch('teft',TCVkeywrdall,'exact');
-TCVsig.iteft_trial=strmatch('teft:trial',TCVkeywrdall);
-TCVsig.ineftav=strmatch('neftav',TCVkeywrdall,'exact');
-TCVsig.ineftav_trial=strmatch('neftav:trial',TCVkeywrdall);
-TCVsig.iteftav=strmatch('teftav',TCVkeywrdall,'exact');
-TCVsig.iteftav_trial=strmatch('teftav:trial',TCVkeywrdall);
-TCVsig.isxr=strmatch('sxr',TCVkeywrdall,'exact');
-TCVsig.isxR=strmatch('sxR',TCVkeywrdall,'exact');
-TCVsig.iece=strmatch('ece',TCVkeywrdall,'exact');
-TCVsig.iMPX=strmatch('MPX',TCVkeywrdall,'exact');
-TCVsig.iIOH=strmatch('IOH',TCVkeywrdall,'exact');
-TCVsig.ivloop=strmatch('vloop',TCVkeywrdall,'exact');
-TCVsig.ipgyro=strmatch('pgyro',TCVkeywrdall,'exact');
-TCVsig.ijtor=strmatch('jtor',TCVkeywrdall,'exact');
-TCVsig.ivi_tor=strmatch('vi_tor',TCVkeywrdall,'exact');
-TCVsig.ivi_torfit=strmatch('vi_torfit',TCVkeywrdall,'exact');
-TCVsig.ivi_pol=strmatch('vi_pol',TCVkeywrdall,'exact');
-TCVsig.ivi_polfit=strmatch('vi_polfit',TCVkeywrdall,'exact');
-TCVsig.iTi=strmatch('Ti',TCVkeywrdall,'exact');
-TCVsig.iTifit=strmatch('Tifit',TCVkeywrdall,'exact');
-TCVsig.ini=strmatch('ni',TCVkeywrdall,'exact');
-TCVsig.inifit=strmatch('nifit',TCVkeywrdall,'exact');
-TCVsig.izeffcxrs=strmatch('zeffcxrs',TCVkeywrdall,'exact');
-TCVsig.izeffcxrsfit=strmatch('zeffcxrsfit',TCVkeywrdall,'exact');
-
-% For each keyword, specify which case to use. As most common is 'simpletdi', fill in with this and change
-% only indices needed. Usually use name of case same as keyword name
-TCVkeywrdcase=cell(size(TCVkeywrdall));
-TCVkeywrdcase(:)={'simpletdi'};
-TCVkeywrdcase(TCVsig.iB0)=TCVkeywrdall(TCVsig.iB0); % through iphi
-TCVkeywrdcase(TCVsig.iqrho)=TCVkeywrdall(TCVsig.iqrho); % special as liuqe q_psi on psi
-TCVkeywrdcase(TCVsig.ivol)=TCVkeywrdall(TCVsig.ivol); % special as nodes _2 or _3 not existing with psitbx
-TCVkeywrdcase(TCVsig.irhovol)=TCVkeywrdall(TCVsig.irhovol); % idem vol
-TCVkeywrdcase(TCVsig.ine)=TCVkeywrdall(TCVsig.ine); % special as dimensions from other nodes
-TCVkeywrdcase(TCVsig.ite)=TCVkeywrdall(TCVsig.ite); % idem
-TCVkeywrdcase(TCVsig.ine_edge)=TCVkeywrdall(TCVsig.ine_edge); % special as dimensions from other nodes
-TCVkeywrdcase(TCVsig.ite_edge)=TCVkeywrdall(TCVsig.ite_edge); % idem
-TCVkeywrdcase(TCVsig.inerho)=TCVkeywrdall(TCVsig.inerho); % idem
-TCVkeywrdcase(TCVsig.inerho_edge)=TCVkeywrdall(TCVsig.inerho_edge); % idem
-TCVkeywrdcase(TCVsig.iteft_trial)=TCVkeywrdall(TCVsig.iteft_trial); % special to extract trial_indx if needed
-TCVkeywrdcase(TCVsig.ineft_trial)=TCVkeywrdall(TCVsig.ineft_trial); % special to extract trial_indx if needed
-TCVkeywrdcase(TCVsig.iteftav_trial)=TCVkeywrdall(TCVsig.iteftav_trial); % special to extract trial_indx if needed
-TCVkeywrdcase(TCVsig.ineftav_trial)=TCVkeywrdall(TCVsig.ineftav_trial); % special to extract trial_indx if needed
-TCVkeywrdcase(TCVsig.iterho)=TCVkeywrdall(TCVsig.iterho); % idem
-TCVkeywrdcase(TCVsig.iterho_edge)=TCVkeywrdall(TCVsig.iterho_edge); % idem
-TCVkeywrdcase(TCVsig.inerhozshift)=TCVkeywrdall(TCVsig.inerhozshift); % idem
-TCVkeywrdcase(TCVsig.iterhozshift)=TCVkeywrdall(TCVsig.iterhozshift); % idem
-TCVkeywrdcase(TCVsig.iprofnerho)=TCVkeywrdall(TCVsig.iprofnerho);
-TCVkeywrdcase(TCVsig.iprofterho)=TCVkeywrdall(TCVsig.iprofterho);
-TCVkeywrdcase(TCVsig.isxr)=TCVkeywrdall(TCVsig.isxr);
-TCVkeywrdcase(TCVsig.isxR)=TCVkeywrdall(TCVsig.isxR);
-TCVkeywrdcase(TCVsig.iece)=TCVkeywrdall(TCVsig.iece);
-TCVkeywrdcase(TCVsig.iMPX)=TCVkeywrdall(TCVsig.iMPX);
-TCVkeywrdcase(TCVsig.iIOH)=TCVkeywrdall(TCVsig.iIOH);
-TCVkeywrdcase(TCVsig.ivloop)=TCVkeywrdall(TCVsig.ivloop);
-TCVkeywrdcase(TCVsig.ipgyro)=TCVkeywrdall(TCVsig.ipgyro);
-TCVkeywrdcase(TCVsig.ijtor)=TCVkeywrdall(TCVsig.ijtor);
-TCVkeywrdcase(TCVsig.ivi_tor)=TCVkeywrdall(TCVsig.ivi_tor);
-TCVkeywrdcase(TCVsig.ivi_torfit)=TCVkeywrdall(TCVsig.ivi_torfit);
-TCVkeywrdcase(TCVsig.ivi_pol)=TCVkeywrdall(TCVsig.ivi_pol);
-TCVkeywrdcase(TCVsig.ivi_polfit)=TCVkeywrdall(TCVsig.ivi_polfit);
-TCVkeywrdcase(TCVsig.iTi)=TCVkeywrdall(TCVsig.iTi);
-TCVkeywrdcase(TCVsig.iTifit)=TCVkeywrdall(TCVsig.iTifit);
-TCVkeywrdcase(TCVsig.ini)=TCVkeywrdall(TCVsig.ini);
-TCVkeywrdcase(TCVsig.inifit)=TCVkeywrdall(TCVsig.inifit);
-TCVkeywrdcase(TCVsig.izeffcxrs)=TCVkeywrdall(TCVsig.izeffcxrs);
-TCVkeywrdcase(TCVsig.izeffcxrsfit)=TCVkeywrdall(TCVsig.izeffcxrsfit);
-
-% Information about which dimension has time, always return 2D data as (x,t) array
-% as most are 1D arrays with time as first index, fill in with ones and change only those needed
-TCVsigtimeindx=ones(size(TCVkeywrdall));
-
-% For the 'simpletdi' cases, we need the full node in case gdat was called with full location directly
-% for the other cases, leave this location empty
-TCVsiglocation=cell(size(TCVkeywrdall));
-TCVsiglocation(:)={''};
-TCVsiglocation(TCVsig.iip)={'\results::i_p'};
-TCVsiglocation(TCVsig.izmag)={'\results::z_axis'};
-TCVsiglocation(TCVsig.irmag)={'\results::r_axis'};
-TCVsiglocation(TCVsig.ircont)={'\results::r_contour'}; TCVsigtimeindx(TCVsig.ircont)=2;
-TCVsiglocation(TCVsig.izcont)={'\results::z_contour'}; TCVsigtimeindx(TCVsig.izcont)=2;
-TCVsiglocation(TCVsig.iq95)={'\results::q_95'};
-TCVsiglocation(TCVsig.ikappa)={'\results::kappa_edge'};
-TCVsiglocation(TCVsig.idelta)={'\results::delta_edge'};
-TCVsiglocation(TCVsig.ideltatop)={'\results::delta_ed_top'};
-TCVsiglocation(TCVsig.ideltabot)={'\results::delta_ed_bot'};
-TCVsiglocation(TCVsig.ineint)={'\results::fir:lin_int_dens'};
-TCVsiglocation(TCVsig.inel)={'\results::fir:n_average'};
-%TCVsiglocation(TCVsig.iprofnerho)={'\results::THOMSON.PROFILES.AUTO:ne'};
-%TCVsiglocation(TCVsig.iprofterho)={'\results::THOMSON.PROFILES.AUTO:te'};
-TCVsiglocation(TCVsig.ineft)={'\results::proffit.local_time:neft_abs'}; TCVsigtimeindx(TCVsig.ineft)=2;
-TCVsiglocation(TCVsig.iteft)={'\results::proffit.local_time:teft'}; TCVsigtimeindx(TCVsig.iteft)=2;
-TCVsiglocation(TCVsig.ineftav)={'\results::proffit.avg_time:neft_abs'}; TCVsigtimeindx(TCVsig.ineftav)=2;
-TCVsiglocation(TCVsig.iteftav)={'\results::proffit.avg_time:teft'}; TCVsigtimeindx(TCVsig.iteftav)=2;
-TCVsiglocation(TCVsig.ineft_trial)=TCVsiglocation(TCVsig.ineft); TCVsigtimeindx(TCVsig.ineft_trial)=2;
-TCVsiglocation(TCVsig.iteft_trial)=TCVsiglocation(TCVsig.iteft); TCVsigtimeindx(TCVsig.iteft_trial)=2;
-TCVsiglocation(TCVsig.ineftav_trial)=TCVsiglocation(TCVsig.ineftav); TCVsigtimeindx(TCVsig.ineftav_trial)=2;
-TCVsiglocation(TCVsig.iteftav_trial)=TCVsiglocation(TCVsig.iteftav); TCVsigtimeindx(TCVsig.iteftav_trial)=2;
-
-if shot==-9
- clear trace
- for i=1:length(TCVkeywrdall)
- fieldname_eff = lower(TCVkeywrdall{i});
- keyword_eff = TCVkeywrdall{i};
- ij=findstr(fieldname_eff,':');
- if ~isempty(ij);
- fieldname_eff(ij)='_';
- keyword_eff(ij:end+1)=[':i' keyword_eff(ij+1:end)] ;
- end
- trace.(fieldname_eff) = keyword_eff;
- end
- % add example for Ip trace full call
- trace.ipfullcall = TCVsiglocation{TCVsig.iip};
- % trace.data=[];
- return
-end
-
-% initialize order of substructures and allows just a "return" if data empty
-trace.data=[];
-trace.x=[];
-trace.t=[];
-trace.dim=[];
-trace.dimunits=[];
-trace.units=[];
-iprintwarn=0;
-% find index of signal called upon
-if strcmp(data_type_eff(1:1),'\')
- % in case full node name was given
- index=strmatch(data_type_eff(1:end-i_23),TCVsiglocation,'exact');
- if iprintwarn & isempty(index)
- disp('********************')
- disp('trace not yet registered.')
- disp('If standard data, ask olivier.sauter@epfl.ch to create a keyqord entry for this data')
-% eval(['!mail -s ''' data_type_eff ' ' num2str(shot) ' ' getenv('USER') ' TCV'' olivier.sauter@epfl.ch < /dev/null'])
- disp('********************')
- elseif isempty(index)
- % temporarily add entry in arrays, so can work below
- index=length(TCVkeywrdall)+1;
- TCVkeywrdall(end+1)={'new'};
- TCVkeywrdcase(end+1)={'simpletdi'};
- TCVsiglocation(end+1)={data_type_eff(1:end-i_23)};
- TCVsigtimeindx(end+1)=0;
- elseif ~strcmp(TCVkeywrdcase{index},'simpletdi')
- msgbox(['Problem in loadTCVdata with data_type_eff = ' data_type_eff ...
- '. Full paths of nodes should only be for case simpletdi'],'in loadTCVdata','error')
- error('in loadTCVdata')
- end
-else
- index=strmatch(data_type_eff_noext,TCVkeywrdall,'exact');
- if isempty(index)
- disp(' ')
- disp('********************')
- disp(['no such keyword: ' data_type_eff(1:end-i_23)])
- disp(' ')
- disp('Available keywords:')
- TCVkeywrdall(:)
- disp('********************')
- return
- end
- if liuqe_version==-1 && ~isempty(strmatch(TCVkeywrdall{index},noFBTE,'exact'))
- disp(['node ' TCVkeywrdall{index} ' not defined within FBTE'])
- return
- end
-end
-if iprintwarn
- disp(['loading' ' ' data_type_eff_noext ' from TCV shot #' num2str(shot)]);
- disp(['case ' TCVkeywrdcase{index}])
-end
-if i_23==2 & isempty(strmatch(TCVsiglocation(index),liuqe23,'exact')) & strcmp(TCVkeywrdcase{index},'simpletdi')
- disp('********')
- disp('Warning asks for liuqe 2 or 3 of a signal, but not in liuqe23 list in loadTCVdata')
-% eval(['!mail -s ''' data_type_eff ' ' num2str(shot) ' ' getenv('USER') ' TCV: not in liuqe23 list'' olivier.sauter@epfl.ch < /dev/null'])
- disp('********')
-end
-
-status=ones(1,100);
-zmag=cell(0,0);
-nargineff=nargin;
-if iprintwarn
- disp('TCVsiglocation{index} in loadTCVdata')
- TCVsiglocation{index}
-end
-
-switch TCVkeywrdcase{index}
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case 'simpletdi'
-
- % load TCV other data
- if liuqe_version==-1
- mdsopen( 'pcs', shot); %synthetic shot generated with FBTE and MGAMS.
- else
- mdsopen(shot);
- % test if node exists
- error_status=1;
- ij=findstr(TCVsiglocation{index},'[');
- if isempty(ij); ij=length(TCVsiglocation{index})+1; end
- if eval(['~mdsdata(''node_exists("\' TCVsiglocation{index}(1:ij-1) '")'')'])
- disp(['node ' TCVsiglocation{index}(1:ij-1) ' does not exist for shot = ' num2str(shot)])
- return
-% $$$ elseif eval(['mdsdata(''getnci("\' nodenameeff ':foo","length")'')==0'])
-% $$$ disp(['no data for node ' nodenameeff ' for shot = ' num2str(shot)])
-% $$$ return
- end
- end
- if strcmp(TCVsiglocation{index}(1:9),'\psitbx::')
- begstr = 'tcv_psitbx("';
- nodenameeff=[begstr TCVsiglocation{index}(10:end) endstr];
- elseif length(TCVsiglocation{index})>16 && strcmp(TCVsiglocation{index}(1:16),'\results::psitbx')
- begstr = 'tcv_psitbx("';
- nodenameeff=[begstr TCVsiglocation{index}(18:end) endstr];
- elseif strcmp(TCVsiglocation{index}(1:10),'\results::')
- nodenameeff=[begstr TCVsiglocation{index}(11:end) endstr];
- else
- nodenameeff=TCVsiglocation{index};
- disp(['should not have gone through here, mention this example to O. Sauter']);
- end
- tracetdi=tdi(nodenameeff);
- mdsclose;
- if isempty(tracetdi.data) || (~iscell(tracetdi.data) && (length(tracetdi.data)<=1) && isnan(tracetdi.data))
- disp(['node ' nodenameeff ' is empty for shot = ' num2str(shot)])
- return
- end
- trace.data=tracetdi.data;
-
- if length(tracetdi.dim)==0
- % scalar
- trace.x=[];
- trace.t=[];
- elseif TCVsigtimeindx(index)>0 | length(tracetdi.dim)==1
- trace.t=tracetdi.dim{max(1,TCVsigtimeindx(index))};
- ix=3-TCVsigtimeindx(index); % works only for 2D arrays
- else
- % if dim=41 assumes is x (usual for TCV)
- if length(tracetdi.dim{1})==41
- ix=1;
- trace.t=tracetdi.dim{2};
- elseif length(tracetdi.dim{2})==41
- ix=2;
- trace.t=tracetdi.dim{1};
- elseif length(tracetdi.dim)==2
- % if one has 2D or more and the other 1D, assume rho is 2D or more and time is 1D
- if min(size(tracetdi.dim{1}))==1 && (min(size(tracetdi.dim{2}))>1 || length(size(tracetdi.dim{2}))>2)
- ix=2;
- trace.t=tracetdi.dim{1};
- disp(['assumes time array is 1D array, so x from dim{' num2str(ix) '}'])
- elseif min(size(tracetdi.dim{2}))==1 && (min(size(tracetdi.dim{1}))>1 || length(size(tracetdi.dim{1}))>2)
- ix=1;
- trace.t=tracetdi.dim{2};
- disp(['assumes time array is 1D array, so x from dim{' num2str(ix) '}'])
- elseif tracetdi.dim{1}(end)<1.1 && tracetdi.dim{2}(end)>1.1
- ix=1;
- trace.t=tracetdi.dim{2};
- disp(['assumes x array is 1D array with max <1.1'])
- elseif tracetdi.dim{1}(end)>1.1 && tracetdi.dim{2}(end)<1.1
- ix=2;
- trace.t=tracetdi.dim{1};
- disp(['assumes x array is 1D array with max <1.1'])
- elseif length(size(tracetdi.dim{1}))==2 && min(size(tracetdi.dim{1}))==1 && length(size(tracetdi.dim{2}))==2 && min(size(tracetdi.dim{2}))==1
- % if both are 1D arrays, assumes time array with values having most number of digits
- ab1=num2str(tracetdi.dim{1}-fix(tracetdi.dim{1}));
- ab2=num2str(tracetdi.dim{2}-fix(tracetdi.dim{2}));
- if size(ab1,2)<size(ab2,2);
- ix=1;
- trace.t=tracetdi.dim{2};
- else
- ix=2;
- trace.t=tracetdi.dim{1};
- end
- disp(['assumes time array has more digits, so x from dim{' num2str(ix) '}'])
- end
- end
- end
- if length(tracetdi.dim)==2
- trace.x=tracetdi.dim{ix};
- % make sure data is of (x,t)
- if ix==2
- % transpose data
- trace.data=trace.data';
- end
- elseif length(tracetdi.dim)>2
- msgbox(['data more than 2D (data_type_eff=' data_type_eff ...
- '), check how to save it, contact andrea.scarabosio@epfl.ch or olivier.sauter@epfl.ch'],...
- 'in simpletdi','warn')
- warning('in simpletdi of loadTCVdata')
- else
- if max(1,TCVsigtimeindx(index))~=1
- disp('Problems in loadTCVdata, max(1,TCVsigtimeindx(index)) should be 1')
- end
- end
- if length(tracetdi.dim)==1
- trace.dim=[{trace.t}];
- trace.dimunits=tracetdi.dimunits(1);
- elseif length(tracetdi.dim)==2
- trace.dim=[{trace.x} ; {trace.t}];
- trace.dimunits=[tracetdi.dimunits(ix) ; tracetdi.dimunits((2-ix)+1)];
- else
- trace.dim=tracetdi.dim;
- trace.dimunits=tracetdi.dimunits;
- end
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
-
- trace.name=[num2str(shot) ';' nodenameeff];
- error_status=0;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'ne','te'}
- % ne or Te from Thomson data on raw z mesh vs (z,t)
- mdsopen(shot);
- if strcmp(TCVkeywrdcase{index},'ne')
- nodenameeff='\results::thomson:ne';
- tracetdi=tdi(nodenameeff);
- tracestd=tdi('\results::thomson:ne:error_bar');
- else
- nodenameeff='\results::thomson:te';
- tracetdi=tdi(nodenameeff);
- tracestd=tdi('\results::thomson:te:error_bar');
- trace_abs=tdi('\results::thomson:fir_thom_rat');
- end
- trace.data=tracetdi.data'; % Thomson data as (t,z)
- trace.std=tracestd.data';
- trace.name=[num2str(shot) ';' nodenameeff];
- % add correct dimensions
- try
- time=mdsdata('\results::thomson:times');
- catch
- warning('Problems with \results::thomson:times')
- disp(['!!!!!!!!!!!!!!!!!!!!!!!!! cannot continue with ' TCVkeywrdcase{index}])
- return
- end
- if isempty(time) || ischar(time)
- thomsontimes=time
- warning('!!!!!!!!!!!!!!!!!!!!!!!!!\results::thomson:times is empty? Check')
- disp(['!!!!!!!!!!!!!!!!!!!!!!!!! cannot continue with ' TCVkeywrdcase{index}])
- return
- end
- z=mdsdata('\diagz::thomson_set_up:vertical_pos');
- trace.dim=[{z};{time}];
- trace.dimunits=[{'Z [m]'} ; {'time [s]'}];
- trace.x=z;
- trace.t=time;
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- mdsclose('mdsip');
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'ne_edge','te_edge'}
- % ne or Te from Thomson.edge data on raw z mesh vs (z,t)
- mdsopen(shot);
- if strcmp(TCVkeywrdcase{index},'ne_edge')
- nodenameeff='\results::thomson.edge:ne';
- tracetdi=tdi(nodenameeff);
- tracestd=tdi('\results::thomson.edge:ne:error_bar');
- else
- nodenameeff='\results::thomson.edge:te';
- tracetdi=tdi(nodenameeff);
- tracestd=tdi('\results::thomson.edge:te:error_bar');
- trace_abs=tdi('\results::thomson.edge:fir_thom_rat');
- end
- trace.data=tracetdi.data'; % Thomson.Edge data as (t,z)
- trace.std=tracestd.data';
- trace.name=[num2str(shot) ';' nodenameeff];
- % add correct dimensions
- try
- time=mdsdata('\results::thomson:times');
- catch
- warning('Problems with \results::thomson:times')
- disp(['!!!!!!!!!!!!!!!!!!!!!!!!! cannot continue with ' TCVkeywrdcase{index}])
- return
- end
- if isempty(time) || ischar(time)
- thomsontimes=time
- warning('!!!!!!!!!!!!!!!!!!!!!!!!!\results::thomson:times is empty? Check')
- disp(['!!!!!!!!!!!!!!!!!!!!!!!!! cannot continue with ' TCVkeywrdcase{index}])
- return
- end
- z=mdsdata('\diagz::thomson_set_up.edge:vertical_pos');
- trace.dim=[{z};{time}];
- trace.dimunits=[{'Z [m]'} ; {'time [s]'}];
- trace.x=z;
- trace.t=time;
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- mdsclose('mdsip');
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'nerho','terho'}
- % ne or Te from Thomson data on rho=sqrt(psi_normalised) mesh: (rho,t)
- mdsopen(shot);
- try
- time=mdsdata('\results::thomson:times');
- catch
- warning('Problems with \results::thomson:times')
- disp(['!!!!!!!!!!!!!!!!!!!!!!!!! cannot continue with ' TCVkeywrdcase{index}])
- return
- end
- if isempty(time) || ischar(time)
- thomsontimes=time
- warning('!!!!!!!!!!!!!!!!!!!!!!!!!\results::thomson:times is empty? Check')
- disp(['!!!!!!!!!!!!!!!!!!!!!!!!! cannot continue with ' TCVkeywrdcase{index}])
- return
- end
- if strcmp(TCVkeywrdcase{index},'nerho')
- nodenameeff='\results::thomson:ne';
- tracetdi=tdi(nodenameeff);
- if isempty(tracetdi.data)
- ishot=mdsopen(shot)
- tracetdi=tdi(nodenameeff)
- end
- nodenameeff='\results::thomson:ne; error_bar ; fir_thom_rat; (ne,std)*fir_thom_rat';
- tracestd=tdi('\results::thomson:ne:error_bar');
- if shot>=23801
- tracefirrat=tdi('\results::thomson.profiles.auto:fir_thom_rat'); %time base not same!!
- if isempty(tracefirrat.data) || ischar(tracefirrat.data)
- disp('problem with \results::thomson.profiles.auto:fir_thom_rat: empty')
- end
- else
- tracefirrat=tdi('\results::thomson:fir_thom_rat');
- if isempty(tracefirrat.data) || ischar(tracefirrat.data)
- disp('problem with \results::thomson.profiles.auto:fir_thom_rat: empty')
- tracefirrat.dim{1}=[];
- else
- tracefirrat.dim{1}=time;
- end
- end
- if ~isempty(tracefirrat.data) || ischar(tracefirrat.data)
- tracefirrat_data=NaN*ones(size(tracetdi.dim{1}));
- itim=iround(time,tracefirrat.dim{1});
- tracefirrat_data(itim)=tracefirrat.data;
- else
- tracefirrat_data=NaN;
- end
- else
- nodenameeff='\results::thomson:te';
- tracetdi=tdi(nodenameeff);
- nodenameeff='\results::thomson:te; error_bar';
- tracestd=tdi('\results::thomson:te:error_bar');
- end
- trace.data=tracetdi.data'; % Thomson data as (t,z)
- trace.std=tracestd.data';
- if strcmp(TCVkeywrdcase{index},'nerho')
- trace.firrat=tracefirrat_data;
- trace.data_abs=trace.data*diag(tracefirrat_data);
- trace.std_abs=trace.std*diag(tracefirrat_data);
- end
- trace.name=[num2str(shot) ';' nodenameeff];
- % add correct dimensions
- % construct rho mesh
- psi_max=tdi(['\results::thomson:psi_max' endstr]);
- psiscatvol=tdi(['\results::thomson:psiscatvol' endstr]);
- if ~isempty(psiscatvol.data) && ~ischar(psiscatvol.data) && ~isempty(psi_max.data) && ~ischar(psi_max.data)
- for ir=1:length(psiscatvol.dim{2})
- rho(ir,:)= sqrt(1.-psiscatvol.data(:,ir)./psi_max.data(:))';
- end
- else
- rho=NaN;
- end
- trace.dim=[{rho};{time}];
- trace.dimunits=[{'sqrt(psi)'} ; {'time [s]'}];
- trace.x=rho;
- trace.t=time;
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- mdsclose;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'nerho_edge','terho_edge'}
- % ne or Te from Thomson.Edge data on rho=sqrt(psi_normalised) mesh: (rho,t)
- mdsopen(shot);
- try
- time=mdsdata('\results::thomson:times');
- catch
- warning('Problems with \results::thomson:times')
- disp(['!!!!!!!!!!!!!!!!!!!!!!!!! cannot continue with ' TCVkeywrdcase{index}])
- return
- end
- if isempty(time) || ischar(time)
- thomsontimes=time
- warning('!!!!!!!!!!!!!!!!!!!!!!!!!\results::thomson:times is empty? Check')
- disp(['!!!!!!!!!!!!!!!!!!!!!!!!! cannot continue with ' TCVkeywrdcase{index}])
- return
- end
- if strcmp(TCVkeywrdcase{index},'nerho_edge')
- nodenameeff='\results::thomson.edge:ne';
- tracetdi=tdi(nodenameeff);
- if isempty(tracetdi.data) || ischar(tracetdi.data)
- ishot=mdsopen(shot)
- tracetdi=tdi(nodenameeff)
- end
- nodenameeff='\results::thomson.edge:ne; error_bar ; fir_thom_rat; (ne,std)*fir_thom_rat';
- tracestd=tdi('\results::thomson.edge:ne:error_bar');
- if shot>=23801
- tracefirrat=tdi('\results::thomson.profiles.auto:fir_thom_rat'); %time base not same!!
- if isempty(tracefirrat.data) || ischar(tracefirrat.data)
- disp('problem with \results::thomson.profiles.auto:fir_thom_rat: empty')
- end
- else
- tracefirrat=tdi('\results::thomson.edge:fir_thom_rat');
- tracefirrat.dim{1}=time;
- end
- if ~isempty(tracetdi.dim)
- tracefirrat_data=NaN*ones(size(tracetdi.dim{1}));
- else
- tracefirrat_data=[];
- end
- if ~isempty(tracefirrat.data) && ~ischar(tracefirrat.data)
- itim=iround(time,tracefirrat.dim{1});
- tracefirrat_data(itim)=tracefirrat.data;
- end
- else
- nodenameeff='\results::thomson.edge:te';
- tracetdi=tdi(nodenameeff);
- nodenameeff='\results::thomson.edge:te; error_bar';
- tracestd=tdi('\results::thomson.edge:te:error_bar');
- end
- if ~ischar(tracetdi.data); trace.data=tracetdi.data'; end % Thomson.Edge data as (t,z)
- trace.std=tracestd.data';
- if strcmp(TCVkeywrdcase{index},'nerho')
- trace.firrat=tracefirrat_data;
- trace.data_abs=trace.data*diag(tracefirrat_data);
- trace.std_abs=trace.std*diag(tracefirrat_data);
- end
- trace.name=[num2str(shot) ';' nodenameeff];
- % add correct dimensions
- % construct rho mesh
- psi_max=tdi(['\results::thomson.edge:psi_max' endstr]);
- psiscatvol=tdi(['\results::thomson.edge:psiscatvol' endstr]);
- if ~isempty(psiscatvol.data) && ~ischar(psiscatvol.data)
- for ir=1:length(psiscatvol.dim{2})
- rho(ir,:)= sqrt(1.-psiscatvol.data(:,ir)./psi_max.data(:))';
- end
- trace.dim=[{rho};{time}];
- trace.dimunits=[{'sqrt(psi)'} ; {'time [s]'}];
- trace.x=rho;
- trace.t=time;
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- else
- trace.dim={};
- trace.dimunits={};
- trace.x=[];
- trace.t=[];
- trace.units={};
- end
- mdsclose;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'nerhozshift','terhozshift'}
- % ne or Te from Thomson data on rho=sqrt(psi_normalised) mesh: (rho,t)
- % allow for z shift of equil
- if nargin>=3 & ~isempty(varargin{1})
- zshift=varargin{1};
- else
- zshift=0.;
- end
- mdsopen(shot);
- try
- time=mdsdata('\results::thomson:times');
- catch
- warning('Problems with \results::thomson:times')
- disp(['!!!!!!!!!!!!!!!!!!!!!!!!! cannot continue with ' TCVkeywrdcase{index}])
- return
- end
- if isempty(time) || ischar(time)
- thomsontimes=time
- warning('!!!!!!!!!!!!!!!!!!!!!!!!!\results::thomson:times is empty? Check')
- disp(['!!!!!!!!!!!!!!!!!!!!!!!!! cannot continue with ' TCVkeywrdcase{index}])
- return
- end
- if strcmp(TCVkeywrdcase{index},'nerhozshift')
- nodenameeff='\results::thomson:ne';
- tracetdi=tdi(nodenameeff);
- tracestd=tdi('\results::thomson:ne:error_bar');
- if shot>=23801
- tracefirrat=tdi('\results::thomson.profiles.auto:fir_thom_rat'); %time base not same!!
- if isempty(tracefirrat.data) || ischar(tracefirrat.data)
- disp('problem with \results::thomson.profiles.auto:fir_thom_rat: empty')
- end
- else
- tracefirrat=tdi('\results::thomson:fir_thom_rat');
- if isempty(tracefirrat.data) || ischar(tracefirrat.data)
- disp('problem with \results::thomson.profiles.auto:fir_thom_rat: empty')
- tracefirrat.dim{1}=[];
- else
- tracefirrat.dim{1}=time;
- end
- end
- if ~isempty(tracefirrat.data) || ischar(tracefirrat.data)
- tracefirrat_data=NaN*ones(size(tracetdi.dim{1}));
- itim=iround(time,tracefirrat.dim{1});
- tracefirrat_data(itim)=tracefirrat.data;
- else
- tracefirrat_data=NaN;
- end
- else
- nodenameeff='\results::thomson:te';
- tracetdi=tdi(nodenameeff);
- tracestd=tdi('\results::thomson:te:error_bar');
- end
- trace.data=tracetdi.data'; % Thomson data as (t,z)
- trace.std=tracestd.data';
- if strcmp(TCVkeywrdcase{index},'nerhozshift')
- trace.firrat=tracefirrat_data;
- trace.data_abs=trace.data*diag(tracefirrat_data);
- trace.std_abs=trace.std*diag(tracefirrat_data);
- end
- trace.name=[num2str(shot) ';' nodenameeff];
- % add correct dimensions
- % construct rho mesh
- if strcmp(endstr,'_-1')
- error(['in ' TCVkeywrdcase{index} ' endstr should not be ' endstr]);
- end
- psi_max=tdi(['\results::thomson:psi_max' endstr]);
- psiscatvol=tdi(['\results::thomson:psiscatvol' endstr]);
- if abs(zshift)>1e-5
- % calculate new psiscatvol
- psitdi=tdi('\results::psi');
- rmesh=psitdi.dim{1};
- zmesh=psitdi.dim{2};
- zthom=mdsdata('dim_of(\thomson:te,1)');
- zeffshift=zshift;
- % set zeffshift time array same as psitdi
- switch length(zeffshift)
- case 1
- zeffshift=zeffshift * ones(size(psitdi.dim{3}));
- case length(psitdi.dim{3})
- % ok
- case length(psiscatvol.dim{1})
- zeffshift=interp1(psiscatvol.dim{1},zeffshift,psitdi.dim{3});
- otherwise
- disp(' bad time dimension for zshift')
- disp(['it should be 1 or ' num2str(length(psiscatvol.dim{1})) ' or ' num2str(length(psitdi.dim{3}))])
- end
- for it=1:length(psiscatvol.dim{1})
- itpsitdi=iround(psitdi.dim{3},psiscatvol.dim{1}(it));
- psirz=psitdi.data(:,:,itpsitdi);
- psiscatvol0=griddata(rmesh,zmesh,psirz',0.9*ones(size(zthom)),zthom-zeffshift(itpsitdi));
- psiscatvol.data(it,:)=psiscatvol0;
- end
- end
- if ~isempty(psiscatvol.data) && ~ischar(psiscatvol.data) && ~isempty(psi_max.data) && ~ischar(psi_max.data)
- for ir=1:length(psiscatvol.dim{2})
- rho(ir,:)= sqrt(1.-psiscatvol.data(:,ir)./psi_max.data(:))';
- end
- else
- rho=NaN;
- end
- trace.dim=[{rho};{time}];
- trace.dimunits=[{'sqrt(psi)'} ; {'time [s]'}];
- trace.x=rho;
- trace.t=time;
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- mdsclose;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'profnerho','profterho'}
- % vol from psitbx
- mdsopen(shot);
- error_status=1;
- if strcmp(TCVkeywrdcase{index},'profnerho')
- nodenameeff=['\results::THOMSON.PROFILES.AUTO:ne'];
- avers=tdi('\results::THOMSON.PROFILES.AUTO:ne:version_num');
- end
- if strcmp(TCVkeywrdcase{index},'profterho')
- nodenameeff=['\results::THOMSON.PROFILES.AUTO:te'];
- avers=tdi('\results::THOMSON.PROFILES.AUTO:te:version_num');
- end
- if avers.data==0
- % may be because nodes not yet filled in, so call once a node
- ab=tdi(nodenameeff);
- avers=tdi([nodenameeff ':version_num']);
- end
- if avers.data>0
- tracetdi=tdi(nodenameeff);
- if avers.data < 2.99
- % for earlier version the bug made it to have logically (rho,t)
- if ~isempty(tracetdi.dim) && ~ischar(tracetdi.data)
- trace.x=tracetdi.dim{1};
- trace.t=tracetdi.dim{2};
- error_status=0;
- else
- error_status=2;
- trace.x=[];
- trace.t=[];
- end
- else
- trace.data=tracetdi.data'; % error in dimensions for autofits
- if ~isempty(tracetdi.dim) && ~ischar(tracetdi.data)
- disp('assumes dim{2} for x in THOMSON.PROFILES.AUTO')
- trace.x=tracetdi.dim{2};
- trace.t=tracetdi.dim{1};
- error_status=0;
- else
- trace.x=[];
- trace.t=[];
- error_status=2;
- end
- end
- else
- tracetdi=avers;
- trace.x=[];
- trace.t=[];
- end
- trace.dim=[{trace.x};{trace.t}];
- trace.dimunits=[{'sqrt(psi)'} ; {'time [s]'}];
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- trace.name=[num2str(shot) '; Thomson autfits from ' nodenameeff ];
- mdsclose;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'B0'}
- % B0 at R0=0.88
- if liuqe_version==-1
- % mdsopen( 'pcs', shot); %synthetic shot generated with FBTE and MGAMS.
- mdsopen(shot)
- nodenameeff = 'tcv_eq("BZERO","FBTE")';
- tracetdi=tdi(nodenameeff);
- trace.data = tracetdi.data;
- trace.t = tracetdi.dim{1};
-
- else
- mdsopen(shot);
- nodenameeff=['\magnetics::iphi'];
- tracetdi=tdi(nodenameeff);
- R0EXP=0.88;
- trace.data=192.E-07 * 0.996 *tracetdi.data/R0EXP;
- trace.t=tracetdi.dim{1};
- end
- trace.x=[];
-%keyboard
- trace.dim=[{trace.t}];
- trace.dimunits=[{'time [s]'}];
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- trace.name=[num2str(shot) ';' nodenameeff];
- mdsclose;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'qrho'}
- % q profile on psi from liuqe
- if liuqe_version==-1
- mdsopen( 'pcs', shot); %synthetic shot generated with FBTE and MGAMS.
- else
- mdsopen(shot);
- end
- nodenameeff=[begstr 'q_psi' endstr];
- tracetdi=tdi(nodenameeff);
- trace.data=tracetdi.data;
- trace.x=sqrt(tracetdi.dim{1}/(length(tracetdi.dim{1})-1));
- trace.t=tracetdi.dim{2};
- trace.dim=[{trace.x};{trace.t}];
- trace.dimunits=[{'sqrt(psi)'} ; {'time [s]'}];
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- trace.name=[num2str(shot) ';' nodenameeff];
- mdsclose;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'vol'}
- % vol from psitbx
- if liuqe_version==-1
- begstr = 'tcv_psitbx("';
- mdsopen( 'pcs', shot); %synthetic shot generated with FBTE and MGAMS.
- nodenameeff=[begstr 'vol' endstr];
- tracetdi=tdi(nodenameeff);
- else
- mdsopen(shot);
- nodenameeff=['\results::psitbx:vol'];
- tracetdi=tdi(nodenameeff);
- if i_23==2
- ['LIUQE' endstr(2:2)]
- psi=psitbxtcv(shot,'+0',['LIUQE' endstr(2:2)]);
- fsd=psitbxp2p(psi,'FS');
- fsg=psitbxfsg(fsd);
- tracetdi.data = fsg.vol.x;
- tracetdi.dim{1}=fsg.vol.grid.x{:}';
- tracetdi.dim{2}=fsg.vol.grid.t';
- end
- end
- trace.data=tracetdi.data;
- if isempty(tracetdi.data) || ischar(tracetdi.data)
- trace.x=tracetdi.dim;
- trace.t=tracetdi.dim;
- trace.dim=tracetdi.dim;
- else
- trace.x=tracetdi.dim{1};
- trace.t=tracetdi.dim{2};
- trace.dim=[{trace.x};{trace.t}];
- end
- trace.dimunits=[{'sqrt(psi)'} ; {'time [s]'}];
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- trace.name=[num2str(shot) ';' nodenameeff '_' num2str(liuqe_version)];
- mdsclose;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'rhovol'}
- % vol from psitbx
- if liuqe_version==-1
- begstr = 'tcv_psitbx("';
- mdsopen( 'pcs', shot); %synthetic shot generated with FBTE and MGAMS.
- nodenameeff=[begstr 'vol' endstr];
- tracetdi=tdi(nodenameeff);
- else
- mdsopen(shot);
- nodenameeff=['\results::psitbx:vol'];
- tracetdi=tdi(nodenameeff);
- if i_23==2
- ['LIUQE' endstr(2:2)]
- psi=psitbxtcv(shot,'+0',['LIUQE' endstr(2:2)]);
- fsd=psitbxp2p(psi,'FS');
- fsg=psitbxfsg(fsd);
- tracetdi.data = fsg.vol.x;
- tracetdi.dim{1}=fsg.vol.grid.x{:}';
- tracetdi.dim{2}=fsg.vol.grid.t';
- end
- end
- trace.data=tracetdi.data;
- for i=1:size(tracetdi.data,2)
- trace.data(:,i)=sqrt(tracetdi.data(:,i)./tracetdi.data(end,i));
- end
- trace.x=tracetdi.dim{1};
- trace.t=tracetdi.dim{2};
- trace.dim=[{trace.x};{trace.t}];
- trace.dimunits=[{'sqrt(psi)'} ; {'time [s]'}];
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- trace.name=[num2str(shot) '; sqrt(V/Va) from ' nodenameeff '_' num2str(liuqe_version)];
- mdsclose;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'sxr','sxR'}
- % load TCV soft x-ray data
- if nargin>=3 & ~isempty(varargin{1})
- i1=varargin{1}(1);
- i2=varargin{1}(2);
- else
- i1=1;
- i2=20;
- end
- if nargin>=4 & ~isempty(varargin{2})
- status=varargin{2};
- else
- status=ones(i2-i1+1,1);
- end
-
- % camera selection: 1-10. each camera has 20 channels
- icamera=[0 1 0 0 0 0 0 0 0 0]; %index of the camera to use
- if ~isempty(find(status(1:20*icamera*ones(10,1)) == 1))
- [fans,vangle,xchord,ychord,aomega,angfact]=xtomo_geometry(1,icamera);
- % calculating intersection of the view lines with magnetic axis
- if strcmp(data_type_eff,'sxR')
- if nargin>=5 & ~isempty(varargin{3})
- zmag=varargin{3};
- else
- zmag=loadTCVdata(shot,['zmag' '_' num2str(liuqe_version)]);
- end
- t_1=zmag.t(1);
- t_2=zmag.t(end);
- [xtomo_signal,t]=get_xtomo_data(shot,t_1,t_2,13e-6*16,icamera,angfact);
- data=interp1(zmag.t,zmag.data,t');
- radius.data=VsxrTCVradius(data,xchord,ychord)';
- radius.t=t';
- varargout{1}={radius};
- trace.R=radius.data;
- else
- t_1=0.001;
- t_2=3;
- [xtomo_signal,t]=get_xtomo_data(shot,t_1,t_2,13e-6*16, ...
- icamera,angfact);
- end
- end
- trace.data=xtomo_signal;
- trace.x=[1:size(trace.data,1)]';
- trace.t=t';
- trace.dim=[{trace.x} ; {trace.t}];
- trace.dimunits=[{'channel #'} ; {'time [s]'}];
- trace.name=[num2str(shot) ';' 'get_xtomo_data'];
- error_status=0;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case 'ece'
- % load TCV ECE data
- % Status=1 => Not Read Yet
- mdsopen(shot);
- if ~isempty(find(status == 1))
- if eval(['~mdsdata(''node_exists("\\RESULTS::ECE:rho")'')'])
- disp(['node \RESULTS::ECE:rho does not exist for shot = ' num2str(shot)])
- return
- end
- if eval(['mdsdata(''getnci("\\RESULTS::ECE:rho","length")'')==0'])
- disp(['no data for \RESULTS::ECE:rho for shot = ' num2str(shot)])
- return
- end
- [TE_ECE,TE_ECE_ERR,RHO,R,T,TE_THOM,TE_THOM_ERR,Fcentral,CAL]=ece_te ...
- (shot,[0.1 0.29],10,10);
- end
- a=min(find(R(:,1)>=0));
- b=max(find(R(:,1)>=0));
- trace.data=TE_ECE(a:b,:)';
- trace.t=T(a:b);
- trace.x=[1:size(trace.data,1)]';
- trace.dim=[{trace.x} ; {trace.t}];
- trace.dimunits=[{'channel #'} ; {'time [s]'}];
- trace.R=R(a:b,:)';
- trace.name=[num2str(shot) ';' '\results::ece...'];
- radius.data=trace.R;
- radius.t=trace.t;
- varargout{1}={radius};
- error_status=0;
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- mdsclose;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case 'MPX'
- % load TCV MPX data
- % Status=1 => Not Read Yet
- if isempty(zmag)
- zmag=loadTCVdata(shot,'zmag');
- end
- t_1=zmag.t(1);
- t_2=zmag.t(end);
- if ~isempty(find(status == 1))
- mdsopen(shot);
- keyboard
- signal=get_mds_mio('MPX',[t_1 t_2]);
- mdsclose;
- trace.data=signal.data;
- for i=1:size(signal.dim{2},2)
- trace.t(:,i)=signal.dim{1};
- end
- end
- trace.dim{1}={trace.t};
- trace.dimunits={'time [s]'};
- trace.name=[num2str(shot) ';' 'get_mds_mio(MPX)'];
- [xchord,ychord]=mpx_geometry;
- varargout{1}={VsxrTCVradius(zmag.data,xchord,ychord)};
- error_status=0;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case 'IOH'
- % Ohmic transformer current
- mdsopen(shot);
- nodenameeff=[{'\magnetics::ipol[*,$1]'} {'OH_001'}];
- tracetdi=tdi(nodenameeff{:});
- trace.data=tracetdi.data;
- trace.x=[];
- trace.t=tracetdi.dim{1};
- trace.dim=tracetdi.dim;
- trace.dimunits={'time [s]'};
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- trace.name=[num2str(shot) ';' nodenameeff{1} ',' nodenameeff{2}];
- mdsclose;
- error_status=0;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case 'vloop'
- % Loop voltage
- mdsopen(shot);
- nodenameeff=[{'\magnetics::vloop[*,$1]'} {'001'}];
- tracetdi=tdi(nodenameeff{:});
- trace.data=tracetdi.data;
- trace.x=[];
- trace.t=tracetdi.dim{1};
- trace.dim=tracetdi.dim;
- trace.dimunits={'time [s]'};
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- trace.name=[num2str(shot) ';' nodenameeff{1} ',' nodenameeff{2}];
- mdsclose;
- error_status=0;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case 'pgyro'
- % ECH power for each gyro(1:9) and total (10)
- mdsopen(shot);
- nodenameeff=[{'\results::toray.input:p_gyro'}];
- tracetdi=tdi(nodenameeff{:});
- trace.data=tracetdi.data;
- trace.x=[];
- trace.t=tracetdi.dim{1};
- trace.dim=tracetdi.dim;
- trace.dimunits=tracetdi.dimunits;
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- trace.name=[num2str(shot) ';' nodenameeff];
- mdsclose;
- error_status=0;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case 'jtor'
- % \results::j_tor , 3-D so need to specify time dim index
- mdsopen(shot);
- nodenameeff=[{'\results::j_tor'} endstr];
- tracetdi=tdi(nodenameeff{:});
- trace.data=tracetdi.data;
- trace.x=tracetdi.dim{1};
- trace.t=tracetdi.dim{3};
- trace.dim=tracetdi.dim;
- trace.dimunits=tracetdi.dimunits;
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- trace.name=[num2str(shot) ';' nodenameeff];
- mdsclose;
- error_status=0;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'neft:trial','teft:trial','neftav:trial','teftav:trial'}
- % trial indx
- mdsopen(shot);
- eval(['nodenameeff={''' TCVsiglocation{index} ':trial''};']);
- tracetdi=tdi(nodenameeff{:});
- if isempty(trialindx)
- error('trialindx should not be empty, check call or ask O. Sauter');
- end
- trace.data=tracetdi.data(:,:,trialindx+1);
- trace.x=tracetdi.dim{1};
- trace.t=tracetdi.dim{2};
- trace.dim=tracetdi.dim(1:2);
- trace.dimunits=tracetdi.dimunits(1:2);
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- trace.name=[num2str(shot) ' ; ' nodenameeff{:} ' ; trialindx=' num2str(trialindx) ];
- mdsclose;
- error_status=0;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- case {'vi_tor', 'vi_torfit', 'vi_pol', 'vi_polfit', 'Ti', 'Tifit', 'ni', 'nifit', 'zeffcxrs', 'zeffcxrsfit'}
- proffit = '';
- kwd_eff = TCVkeywrdcase{index};
- ii=strfind(kwd_eff,'fit');
- if ~isempty(ii);
- proffit = ':proffit';
- kwd_eff = kwd_eff(1:ii-1);
- end
- if strcmp(kwd_eff,'zeffcxrs'); kwd_eff = 'zeff'; end
- mdsopen(shot);
- eval(['nodenameeff=''\results::cxrs' proffit ':' kwd_eff endstr ''';']);
- tracetdi=tdi(nodenameeff);
- trace.data=tracetdi.data;
- if length(tracetdi.dim)>1;
- trace.x=tracetdi.dim{1};
- trace.t=tracetdi.dim{2};
- else
- trace.x=[];
- trace.t=[];
- end
- trace.dim=tracetdi.dim;
- trace.dimunits=tracetdi.dimunits;
- % isfield does not work since tracetdi is not a 'struct' but a tdi object, thus isfield using isa does not work
- if any(strcmp(fieldnames(tracetdi),'units'))
- trace.units=tracetdi.units;
- end
- trace.name=[num2str(shot) ';' nodenameeff];
- % add error bars
- eval(['nodenameeff=''\results::cxrs' proffit ':' kwd_eff ':err' endstr ''';']);
- nodenameeff=[{'\results::cxrs:vi_tor:err'} endstr];
- tracetdi=tdi(nodenameeff{:});
- trace.std = tracetdi.data;
- if length(tracetdi.dim)>2;
- trace.std_rho = tracetdi.dim{1};
- trace.std_t = tracetdi.dim{2};
- else
- trace.std_rho = [];
- trace.std_t = [];
- end
- mdsclose;
- error_status=0;
-
- %&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
- otherwise
- % eval(['!mailto_Andrea ''from loadTCVdata, data_type_eff= ' data_type_eff ''''])
- disp(['this data_type_eff' ' ' data_type_eff ' ' 'not yet programmed in loadTCVdata, ask Andrea.Scarabosio@epfl.ch']);
-
-end